1. Preparing the Device

Before starting the measurement, the device must reach the optimal temperature. During this heating phase, it is important to keep the protective cap on the device. This prevents measurement inaccuracies and protects the sensitive probe tip.

2. The Stone Must Be Clean and Dry

For an accurate measurement, the diamond must be free of dirt, oil, or moisture. Clean and dry it thoroughly before testing to avoid incorrect results.

3. Correct Use of the Probe Tip

Hold the probe tip of the SmartPro MAX using the silver grip surface perpendicular and centered on the table of the diamond being tested. This ensures an accurate and reliable analysis.

4. Special Measurement Requirements for Larger Stones

For stones of 3 carats or more, the measurement should be taken at the edge of the table. This contributes to a more precise determination of the diamond type.

5. Multiple Tests for Increased Accuracy

To ensure the accuracy of the results, it is recommended to perform each test multiple times. This helps eliminate possible measurement errors and achieve more precise results.

6. Documenting the Results

The measurement results can be conveniently recorded and printed via the app. Use this function to document your tests and save comparison values for future tests.

Conclusion

With the SmartPro MAX, you can reliably test daimond as long as you follow the correct steps. Pay special attention to a clean and dry surface, proper handling of the probe tip, and repeat tests for security. Use the app to professionally document your results. This way, you are well-equipped for any diamond testing!